Hand Held Hydraulic Filter Unit Trico 36994 0.5 HP 5.5 GPM 115VAC

Description

Trico 36994 0.5 HP 5.5 GPM 115VAC Hand Held Hydraulic Filter Unit. Shipped with USPS Priority Mail.
Please refer to photos for details as there are some dents on the filters and cosmetic scratches. This is a new unused item with no packaging or boxes. Will come with manual.
Technical specs:
Item- Hand held hydraulic filter unit
Max operating temp- 150 degrees F/ 65 degrees C
Max fluid viscosity- 2000 SUS (430 cSt)
Suction/ discharge line- 3/4" / 1" non-collapsible PVC
Suction/ lift- 20ft
Motor HP- 0.5 @ 1750 rpm
Voltage- 115 VAC 60Hz
Amps- 8.8
Max. pressure- 50 psi
Max. flow rate- 5.5 gpm
Filter type- spin-on
Primary filter rating- 10 micron absolute beta>200
Primary filter media- microglass
Secondary filter rating- 10 micron nominal water
Secondary filter media- cellulose
Primary filter removes- particulates
Primary filter housing type- single length
Secondary filter removes- water
secondary filter housing type- single length
Differential pressure- 85 psi
Relief valve setting- 50 psi
Bypass valve included- no
Number of filters- 2
Pump bypass pressure- 50 psi
Filter bypass pressure- 43 psi
Hydraulic pump type- gear
Motor type filters- electric
Overall height- 12"
Overall width- 11"
Overall depth- 20"
Weight- 47 lb.
Application- filtering new oil to clean, transferring from bulk drums to storage tanks or system reservoirs, 430cSt At 40DC
Acceptable for field wiring
One Parker 811-16 suction hose //-/ SAE 100R4-16 25mm (1) 2Q19
One Parker 811-12 suction hose //-/ SAE 100R4-12 19mm (3/4) 2Q19
Trico Low Viscosity Filtration Systems are designed to transfer and filter hydraulic/ lubricating oils with viscosities less than 2000 SUS (430 cSt). Filter media is designed to be used with hydrocarbon based fluids and should NOT be used with potentially flammable fluids such as diesel fuel or alcohols. Before operating this equipment the operator should thoroughly read all instructions before proceeding.
The Trico Low Viscosity Filtration Systems are self priming units. Lubrication is not provided to the pump gears at the factory before the units are shipped. After assembly and before operating for the first time, it is recommended to place a small amount of oil that is intended to be pumped into the suction line and allow the fluid to enter the pump gears by elevating the suction line higher then the pump head. This should also be done whenever the units have been stationary for over a month or has been cleaned or serviced. Running the pump gears dry will cause premature wear and shorten the life of your filtration system.
Trico Low Viscosity Filtration System Instruction Manual included in purchase.
Please read the details of sale thoroughly and see  all listing photos for actual condition before buying. These are sold in as-is condition. All sales are final. We do not accept returns for any reason.
Please expect up to 2 entire business days after payment has been received of handling time before this item will be shipped.